J. Laurenzo Specialty Products

Recessed Seat-Cover Dispenser, Sanitary Napkin Disposal and Toilet Tissue Dispenser

Recessed Seat-Cover Dispenser, Sanitary Napkin Disposal and Toilet Tissue Dispenser
Description
Specifications
Questions
Description

Type-304 stainless steel with all welded construction; exposed surfaces shall have satin finish. Recessed installation in side wall of single compartment. Unit mounts on left side of toilet (when seated) with tissue dispenser on right side. Capacity: 0.8-gal. (3.0-L). Door unlocks with key provided and swings open for filling. Holds 250 toilet seat covers and two standard core tissue rolls for each compartment. Theft resistant spindles. Rough Partition Opening: 16" W, 29 1/4" H, 4" min. depth (405 x 745 x 100mm).

ADA Compliant

Recessed Toilet-Seat-Cover Dispenser, Sanitary Napkin Disposal and Toilet Tissue Dispenser Units: 1. Basis of Design: Bobrick ClassicSeries Model B-3574. a. ADA Compliance: 1) Unit mounts flush against side wall in accessible toilet compartment to allow clearance for horizontal grab bar across front of unit and installation of 18 inch (460mm) vertical grab bar (ICC/ANSI A117.1-2009). 2) Unit has toilet tissue dispensers on right side for installation in accessible toilet compartment on left side of toilet (when seated on toilet). Cabinet: All welded, 18-8, Type 304, heavy gauge stainless steel with satin finish on exposed surfaces. Flange: Drawn and beveled, one-piece, seamless, 18-8, Type 304, 22 gauge (0.8mm) stainless steel with satin finish. Door: One-piece, seamless, 18-8, Type 304, 18 gauge (1.2mm) stainless steel with satin finish; with two tumbler locks keyed like other washroom accessories. Hinge: Full-length stainless steel piano-hinge. Disposal Panel: 18-8, Type 304, 22 gauge (0.8mm) stainless steel push door with hemmed edges and satin finish on exposed surfaces; secured to cabinet with spring-loaded, full-length stainless steel piano-hinge. Equipped with international graphic symbols identifying napkin disposal. Waste Receptacle: Leak-proof molded polyethylene, removable for servicing. Capacity 0.8 gallons (3.0 L). Toilet Tissue Dispensers (2): 0.100 inch (2.5mm) thick ABS plastic; with theft-resistant, heavy-duty, one-piece, molded ABS plastic spindles; rolls removable from cabinet only when door is open. Toilet Tissue Capacity: Unit holds two standard-core toilet tissue rolls up to 5-1/4 inch (135mm) diameter (1800 sheets). Seat-Cover Capacity: 500 paper toilet-seat-covers.

Specifications
  • CARTON Height: 6.325 in
  • CARTON Length: 34.125 in
  • CARTON Depth: 19.875 in
  • CARTON Weight: 19.86 lb
Questions
Have a question about this item? Click here to ask
© 2024 J. Laurenzo Specialty Products. All rights reserved.