J. Laurenzo Specialty Products

Folding Shower / Dressing Area Seat

Description
Specifications
Questions
Description

Compact design. Seat is constructed of durable, water-resistant, ivory colored, 5/16" (8mm) thick solid phenolic. Frame and mounting bracket are Type 304 stainless steel and self-locking mechanism. Supports up to 500 lbs (227 kg) when properly installed. Seat 22" (560mm) wide, projects 15 13/16" (400mm) from wall.

SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended. Consult and comply with local building codes. To avoid potential injury, the building owner or maintenance personnel should remove the shower seat from service if the shower seat is not adequately secured to the wall. In the interests of safety and the protection of end users, this seat should not be used to support weights exceeding 500lbs (227 kg). To avoid potential seat malfunction, DO NOT use seat if weight exceeds 500 lbs (227 kg). Failure to abide by this warning may result in seat malfunctioning, potentially causing minor to moderate injury.

ADA Compliant

Solid Phenolic Folding Shower Seats: Basis of Design: Bobrick Model B-5192. Compliance: Universal/accessibility design, including ADA-ABA and ICC/ANSI for structural strength; clearance between back of shower seat and wall is 1-3/8 inches (35mm). a. Capacity: Designed to support 500 lbs (227 kg) in compliant installations. Seat: One-piece, 5/16 inch (8mm) thick, solid phenolic with matte-finish, ivory-colored, melamine surfaces and black phenolic-resin core, integral slots for water drainage; secured to frame with stainless steel carriage bolts and acorn nuts. Folds against wall when not in use. Seat Supports: Do not come into contact with floor. Frame: 18-8, Type 304 stainless steel with satin finish; 16 gauge (1.6mm), 1-1/4 inch (32mm) square members, 18 gauge (1.2mm), 1 inch (25mm) diameter tubing. Mounting Flanges: 18-8, Type 304, 3/16 inch (5mm) thick stainless steel with satin finish; 3 inch (76mm) diameter with three mounting screw holes. Baseplate: 18-8, Type 304, heavy gauge stainless steel. Holds seat against wall. Spring: 17-7, Type 301, 24 gauge (0.6mm) stainless steel, spot-welded to baseplate. Holds seat against wall. Guide Bracket: 18-8, Type 304, 16 gauge (1.6mm) stainless steel with satin finish.

Specifications
  • CARTON Height: 13.78 in
  • CARTON Length: 25.5 in
  • CARTON Depth: 14.44 in
  • CARTON Weight: 18.7 lb
Questions
Have a question about this item? Click here to ask
© 2024 J. Laurenzo Specialty Products. All rights reserved.