Folding Shower Seat

Complies with Planning Guide for Accessible Restrooms. Foam-padded, white, water-resistant Naugahyde seat 1 1/2" (38mm) thick, with enclosed 1/2" (13mm) plywood base. Frame and mounting brackets are type 304 stainless steel and Feature self-locking mechanism. Supports up to 360 lbs (163 kg) when properly installed. Seat 32 7/8" (835mm) wide, projects 22 11/16" (575mm) from wall. Right-hand seat.

SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended. Consult and comply with local building codes. To avoid potential injury, the building owner or maintenance personnel should remove the shower seat from service if the shower seat is not adequately secured to the wall. In the interests of safety and the protection of end users, this seat should not be used to support weights exceeding 360lbs (163 kg). To avoid potential seat malfunction, DO NOT use seat if weight exceeds 360 lbs (163 kg). Failure to abide by this warning may result in seat malfunctioning, potentially causing minor to moderate injury.

ADA Compliant

Folding Shower Seats With Bobrick Padded Cushion: Basis of Design: Bobrick Model B-517. a. Configuration: Right-hand seat. Compliance: Universal/accessibility design, including ADA-ABA and ICC/ANSI. for structural strength; clearance between back of shower seat and wall is 1-1/2 inches (38mm). a. Capacity: Designed to support 360 lbs (163 kg) in compliant installations. Seat: 2 inches (51mm) overall thickness, comprised of 1-1/2 inch (38mm) thick, closed-cell polyurethane foam padding mounted on 1/2 inch (13mm) thick plywood; covered in white naugahyde (water-resistant, reinforced vinyl fabric). Folds against wall when not in use. Seat Supports: Do not come into contact with floor. Frame: 18-8, Type 304 stainless steel with satin finish; 16 gauge (1.6mm), 1-1/4 inch (32mm) square members, 18 gauge (1.2mm), 1 inch (25mm) diameter tubing. Mounting Flanges: 18-8, Type 304, 3/16 inch (5mm) thick stainless steel with satin finish; 3 inch (76mm) diameter with three mounting screw holes. Baseplate: 18-8, Type 304, heavy gauge stainless steel. Spring: 17-7, Type 301, 24 gauge (0.6mm) stainless steel, spot-welded to baseplate. Holds seat against wall. Guide Bracket: 18-8, Type 304, 16 gauge (1.6mm) stainless steel with satin finish.