Partition-Mounted, Seat-Cover Dispenser, Sanitary Napkin Disposal and Toilet Tissue Dispenser
Type-304 stainless steel with all welded construction; exposed surfaces shall have satin finish. One side mounts flush against partition of Accessible Design compartment to allow clearance for grab bar. Unit mounts on right side of toilet (when seated) with tissue dispenser on left side. Used from both sides, serviced from one side. Capacity: 0.8-gal. (3.0-L). Door unlocks with key provided and swings open for filling. Holds 250 toilet seat covers and two standard core tissue rolls for each compartment. Theft-resistant spindles. Rough Partition Opening: 15 1/2" W, 28 7/8" H (395 x 735mm).
ADA Compliant
Partition-Mounted Seat-Cover Dispenser, Sanitary Napkin Disposal and Toilet Tissue Dispenser Units: Serves two compartments. Basis of Design: Bobrick ClassicSeries Model B-3571. a. ADA Compliance: 1) Unit mounts in accessible toilet compartment with flush side against partition to allow clearance for horizontal grab bar across front of unit and installation of 18 inch (460mm) vertical grab bar (ICC/ANSI A117.1-2009). 2) Flush side of unit has toilet tissue dispensers on left side for installation in accessible toilet compartment on right side of toilet (when seated on toilet). Mounting Kit: Bobrick Binder Post Kit No. 354-119; for through-bolting method of installation in partitions 1/2 inch thick. Mounting Kit: Bobrick Kit No. 354-124; for partitions 3/4 inch to 1-1/4 inch (19 to 32mm) thick. Cabinet: All welded, 18-8, Type 304, heavy gauge stainless steel with satin finish on exposed surfaces. Plastic Sight Barrier: In toilet seat cover dispenser. Flanges: Drawn and beveled, one-piece, seamless, 18-8, Type 304, 22 gauge (0.8mm) stainless steel with satin finish. Door and Permanent Panel: One-piece, seamless, 18-8, Type 304, 18 gauge (1.2mm) stainless steel with satin finish; with two tumbler locks keyed like other washroom accessories. Hinge: Full-length stainless steel piano-hinge. Disposal Panels (2): 18-8, Type 304, 22 gauge (0.8mm) stainless steel push doors with hemmed edges and satin finish on exposed surfaces; secured to cabinet with spring-loaded, full-length stainless steel piano-hinge. Equipped with international graphic symbols identifying napkin disposal. Waste Receptacle: Leak-proof molded polyethylene, removable for servicing. Capacity 0.8 gallons (3.0 L). Toilet Tissue Dispensers (4): 0.100 inch (2.5mm) thick ABS plastic; with theft-resistant, heavy-duty, one-piece, molded ABS plastic spindles; rolls removable from cabinet only when door is open. Toilet Tissue Capacity: Unit holds four standard-core toilet tissue rolls up to 5-1/4 inch (135mm) diameter (1800 sheets), two for each compartment. Seat-Cover Capacity: 1000 paper toilet-seat-covers, 500 for each compartment.
- CARTON Height: 6.325 in
- CARTON Length: 34.125 in
- CARTON Depth: 19.875 in
- CARTON Weight: 20.94 lb