Recessed Paper Towel Dispenser/Waste Receptacle with TowelMate and LinerMate

Unit equipped with TowelMate and LinerMate. Satin-finish stainless steel. Flush tumbler lock. Dispenses 350 C-fold or 475 multifold towels. Waste receptacle has 3.0-gal. (11.3-L) capacity; projects 2 1/2" (65mm) from wall. Removable front panel for cleaning. Wall Opening: 11 3/8" W, 26 5/8" H, 4" min. depth (290 x 675 x 100mm).

To retrofit TowelMate prior to April 2010 or LinerMate prior to December 2009 into existing installed units refer to accessories section below.

ADA Compliant

Recessed Paper Towel Dispenser and Waste Receptacle: Basis of Design: Bobrick ConturaSeries Model B-4369 furnished with Bobrick 369-130 TowelMate and Bobrick 4369-134 LinerMate. a. Bobrick TowelMate: Dispenses one paper towel at a time without towels sagging or falling through the towel tray opening. Round nylon rod and stainless steel rod screws support stack of paper towels. b. Bobrick LinerMate: Molded plastic sleeve riveted to U-shaped, 18-8, Type 304, 20 gauge (0.91mm) stainless steel, hemmed support strap; secures disposable plastic can liners, eliminates liner overhang waste receptacle. Cabinet: All-welded, 18-8, Type 304, 22 gauge (0.8mm) stainless steel with satin finish on exposed surfaces. Flange: Drawn, one-piece, seamless, 18-8, Type 304, 22 gauge (0.8mm) stainless steel with satin finish. Flange corners and edges shall have radii that complement arc on front of unit and shall have the same radii on flange corners and edges as other Bobrick ConturaSeries washroom accessories. Flange shall have same partial exposure behind paper towel dispenser door and waste receptacle front panel as other Bobrick ConturaSeries recessed washroom accessories. Door: Drawn, one-piece, seamless, 18-8, Type 304, 22 gauge (0.8mm) stainless steel with satin finish; with flush tumbler lock keyed like other washroom accessories. Front of door shall have same degree of arc, radius on corners and edges as other Bobrick ConturaSeries recessed washroom accessories. Hinge: Full-length stainless steel piano-hinge. Towel Dispenser: 18-8, Type 304, 22 gauge (0.8mm) stainless steel with satin finish, cabinet inside equipped with 90 degree return towel guide angle. Towel Dispensing: Hemmed towel tray opening dispenses towels without tearing. Towel Capacity: 350 C-fold or 475 multifold towels. Waste Receptacle: Formed, one-piece, seamless, 18-8, Type 304, 22 gauge (0.8mm) stainless steel with satin finish. Front removable panel with hemmed top edge; secured to cabinet with two keyholes over studs on bottom and two tamper-resistant setscrews on top. Front of waste receptacle shall have same degree of arc, radius on corners and edges as other Bobrick ConturaSeries washroom accessories. Waste Capacity: 3.0 gallons (11.3 L).

Request a FREE Quote Today!